Categories
Description
Stainless round bar with a diameter of 100 mm and a length of 70 cm, made of steel grade 1.4841 / 310S by hot rolling. Theoretical weight of the section: 43.8 kg.
Heat-resistant steel designed for use at elevated temperatures. The grade is characterized by resistance to oxidation and retention of mechanical properties under thermal conditions where standard stainless steels may prove insufficient.
Hot-rolled bars are produced by rolling steel at elevated temperatures. This method allows for a wide range of diameters and ensures good material ductility. The surface of hot-rolled bars may exhibit a characteristic mill scale layer, which is removed during further processing.
Technical data
| Item length | 70 cm |
| Diameter | 100 mm |
| Steel grade | 1.4841 |
| Norm | EN10088-3:2014 |
| 3.1 certificate available | Yes |
| Production method | Hot rolled |
| Diameter tolerance | k12 |
| Cutting tolerance | -0 / +5 mm |
| Weight | 43.75 kg |
| Product code | S-PGL/100.00/1.4841/70CM |
Legal notes
⚠ Notice! Non-prefabricated goods made to the consumer's specification — not subject to the right of withdrawal pursuant to Art. 16(c) of Directive 2011/83/EU on consumer rights.
Sections are cut from stock material with lengths ranging from 5000–7000 mm. Cutting tolerance: -0 / +5 mm. When purchasing multiple units of the same product, you will receive separate sections. Cutting to any custom length is possible upon consultation.
The bar is a steel mill product, manufactured in accordance with EN or ASTM standards, intended for further processing. The image shown in the listing is illustrative and does not represent the actual surface of the product. Due to the characteristics of the band saw used for cutting, a perfectly smooth surface at the cut area cannot be guaranteed.
Any properties not listed in the offer are determined by the standard.
