Skip to main content
Open search engine
Search
Close search engine Clear Search
Wishlist
Products in the cart: 0. See details

Your cart is empty

Stainless steel heat-resistant seamless pipe hollow bar DN150 OD 159 mm x 20 mm H25T (equivalent 1.4749) 130cm

with VAT without VAT
Price €6,054.27
Availability:
product-availability-module sold out
Ask about the product
Choose length
Selected: -
100 cm 110 cm 120 cm 140 cm 150 cm 160 cm 170 cm 180 cm 190 cm 200 cm 250 cm 300 cm

Complete your order:

Certificate 3.1 - select only one for the whole basket €5.00 EUR

Specifications

  • Item length 130 cm
  • Outside diameter (OD) DN150 / 159.00 mm
  • Wall thickness (WT) 20.00 mm
  • Steel grade 1.4749 / H25T / 15X25T
  • Norm EN 10216-5 / ASTM 213 / ASTM 312
  • 3.1 certificate available yes

Description

Stainless steel heat-resistant seamless pipe hollow bar with an outside diameter (OD) of 159 mm and a wall thickness of 20 mm, steel grade H25T. Section length: 130 cm. Theoretical weight: 90.5 kg. Stainless steel hollow bars are thick-walled seamless pipes whose strength allows them to be used in structural elements, machine parts and components subject to high mechanical loads. Stainless seamless pipes are characterized by their high pressure resistance. See the pressure table for selected diameters.

Grade H25T is similar in chemical composition to grade 1.4749 (EN) and is presented in our offer as its equivalent. However, these are not identical grades — they differ in the content of certain alloying elements. In H25T, the stabiliser is titanium, while in 1.4749 this role is fulfilled by aluminium. This comparison is indicative and is intended to help customers familiar with the European standard identify the material. More details can be found on this page.

Legal notes

Caution! Non-prefabricated goods - not subject to the right of withdrawal under EU Directive 2011/83/EU, art. 16(c) on consumer rights.

Sections are cut from material in lengths of 5000-7000 mm. When purchasing multiple pieces of the same product, you will receive separate sections, but cutting to any length is possible after consultation. The image in the listing does not represent the actual surface of the product. The tube is a metallurgical product in raw condition, manufactured in accordance with EN 10216-5 or ASTM 213 or ASTM 312, intended for further processing. The specifics of the band saw used for cutting do not guarantee a perfectly smooth cut surface. Cutting tolerance is -0/+5mm. Tolerance for wall thickness and diameter is no greater than T3/D3 (tolerance table). The stated tolerances apply to full lengths, and the control measurement is taken at the ends of the tube. When purchasing non-prefabricated sections other than those listed in the production certificate for a given batch, deviations from the values stated in the 3.1 certificate may be expected and this cannot be grounds for considering the product as non-compliant or substandard.