Skip to main content
Open search engine
Search
Close search engine Clear Search
Wishlist
Products in the cart: 0. See details

Your cart is empty

Stainless steel seamless pipe hollow bar DN150 OD 168.3 mm x 18.26 mm 1.4301 / 1.4307 / 304 / 304L 130cm

with VAT without VAT
Price €7,302.03
Availability:
product-availability-module sold out
Ask about the product
Choose length
Selected: -
100 cm 110 cm 120 cm 140 cm 150 cm 160 cm 170 cm 180 cm 190 cm 200 cm 250 cm 300 cm

Complete your order:

Certificate 3.1 - select only one for the whole basket €5.00 EUR

Specifications

  • Item length 130 cm
  • Outside diameter (OD) DN150 / 168.30 mm
  • Wall thickness (WT) 18.26 mm
  • Steel grade 1.4307
  • Norm EN 10216-5 / ASTM 213 / ASTM 312
  • 3.1 certificate available yes

Description

Stainless steel seamless pipe hollow bar with an outside diameter (OD) of 168.3 mm and a wall thickness of 18.26 mm, steel grade 1.4301 / 1.4307 / 304 / 304L. Section length: 130 cm. Theoretical weight: 89.2 kg. Stainless steel hollow bars are thick-walled seamless pipes whose strength allows them to be used in structural elements, machine parts and components subject to high mechanical loads. Stainless seamless pipes are characterized by their high pressure resistance. See the pressure table for selected diameters.

Austenitic stainless steel with very good corrosion resistance, good weldability and a wide range of industrial applications. The material is used in machine construction, food industry, chemical industry and general structures.

Legal notes

Caution! Non-prefabricated goods - not subject to the right of withdrawal under EU Directive 2011/83/EU, art. 16(c) on consumer rights.

Certificate 3.1 available - more information in the cart. Sections are cut from stock material. When purchasing multiple pieces of the same product, you will receive separate sections, but cutting to any length is possible after consultation. The image in the listing does not represent the actual surface of the product. The tube is a metallurgical product in raw condition, manufactured in accordance with EN 10216-5 or ASTM 213 or ASTM 312, intended for further processing. The specifics of the band saw used for cutting do not guarantee a perfectly smooth cut surface. Cutting tolerance is -0/+5mm. Tolerance for wall thickness and diameter is no greater than T3/D3 (tolerance table). The stated tolerances apply to full lengths, and the control measurement is taken at the ends of the tube. When purchasing non-prefabricated sections other than those listed in the production certificate for a given batch, deviations from the values stated in the 3.1 certificate may be expected and this cannot be grounds for considering the product as non-compliant or substandard.