Food Grade Stainless Steel Pipe
Quick filters
Filters
List of products
Stainless steel pipe for the food industry
In dairies, breweries, fruit, meat and beverage plants, pipes have to withstand the product, hot water, steam and CIP cleaning chemicals – and must not release anything into the food. The austenitic stainless steels 304 and 316L meet these requirements. In this category we have collected seamless food grade stainless steel pipe in the diameters and wall thicknesses typical of process installations – from instrument and impulse lines up to 114.3 mm OD (DN100) process lines.
Seamless pipe or sanitary tubing?
Many food plants are built with thin-wall, welded and polished sanitary tubing (ASTM A270, 3-A, DIN 11850 / EN 10357). Our pipes are seamless pipes to EN 10216-5 – they have no longitudinal weld, so they are chosen where pressure, superheated steam, high cleaning temperatures or a uniform material around the whole circumference matter, for example in process steam lines, heat exchangers and CIP systems. They are not polished on the inside.
304 or 316L?
304 (1.4301) stainless pipe is enough for milk, beer, water and most pH-neutral products. For brines, sauces, fruit juices, vinegar and wherever chlorine-based cleaning agents are used, choose the molybdenum-bearing 316L (1.4404) stainless pipe. For potable water lines, see stainless steel water pipe; the full range of sizes is in seamless tubes and hollow bars. For the same diameters you will also find butt-weld seamless elbows and seamless tees.
Frequently Asked Questions
Is this sanitary tubing (ASTM A270 / 3-A)?
No. These are seamless pipes to EN 10216-5. Sanitary tubing is thin-wall, welded and polished. Seamless pipe is chosen where there is pressure, process steam or a requirement for no longitudinal weld.
304 or 316L for a food processing line?
304 is enough for milk, beer, water and pH-neutral products. 316L with molybdenum is chosen for brines, sauces, fruit juices, vinegar and for lines cleaned or disinfected with chlorine.
Do you supply a declaration of conformity for food contact?
No, we do not issue a declaration of conformity under Regulation (EC) No 1935/2004 or FDA documentation. The material is documented by an EN 10204 3.1 inspection certificate showing the grade, heat number and chemical composition – on request, for a fee.
Are the pipes polished inside?
No, the pipes in this list have a mill finish and are not polished on the inside. If you need a different finish, ask before ordering.
How are pipes joined in a food plant?
Most often by orbital or manual TIG butt welding with a back purge. After welding, the weld should be cleaned and passivated. Fittings in the same diameters are listed under seamless elbows and seamless tees.
Are the sizes in inches or Schedule?
No, the sizes are metric. Each product name gives the DN, the actual OD and the wall thickness in millimeters. Metric ODs differ slightly from NPS and tube OD sizes, so choose fittings made for metric OD.
Are the pipes suitable for steam?
Seamless pipes are the right choice for process steam. The permissible pressure depends on the diameter, wall thickness and temperature – check it against your design before ordering.
What is the brown film inside hot-water and steam lines?
Most often it is rouging – a deposit of iron oxides in hot-water and steam systems. It is removed chemically, and passivation helps to limit it.
Can you cut the pipe to length?
Yes. You choose the length on the product page and we cut the pipe with a band saw, tolerance −0/+5 mm. A band saw does not leave a perfectly smooth cut face.
If I order several pieces, will they come as one length?
No, several pieces of the same product are shipped as separate lengths. Cutting to a different length is possible after consulting our shop staff.
Can I get a 3.1 certificate?
Yes, an EN 10204 3.1 inspection certificate (often called a mill test report, MTR) is available on request for a fee. It shows the grade, heat number and chemical composition of the material.
When will you ship my order?
We ship the order or have it ready for pickup within 3 business days after the payment is received. Within the EU we deliver by courier. If an order is fulfilled in parts, some items may arrive in a separate shipment.
Do you ship to the US?
Delivery outside the EU, including to the United States, is arranged individually. Email us the products and quantities and we will get back to you with the options.
Can I pick up the order in person?
Yes, at our warehouse at ul. Pszczyńska 140, Warszowice, Poland, once we have notified you that the order is ready for pickup.
Do you issue a VAT invoice?
Yes, we issue a VAT invoice for your order.
Can I return the goods?
Consumers may withdraw from the purchase within 14 days of delivery if the goods are unused and undamaged; the return shipping cost is paid by the buyer. Goods made to an individual order, i.e. with a specification other than on the product page, cannot be returned.
I need a larger quantity or a non-standard size – what should I do?
Email [email protected] or call +48 660 621 705. Tell us the product, grade, dimensions and quantity and we will prepare a quote.