Stainless steel hollow bar seamless tube DN125 OD 140 mm x 14 mm steel grade 1.4301 / 1.4307 100cm

€727.41

Availability:

sold out

Ask about the product

Complete your order:

Certificate 3.1 - select only one for the whole basket €5.00 EUR

Item length 100 cm

Outside diameter (OD) DN125 / 140.00 mm
Wall thickness (WT) 14.00 mm

Steel grade 1.4307

Description

Size temporarily unavailable. We have a product in a similar size here.

Seamless stainless steel tube

Segment length: 100cm - It is possible to cut to any length.
Outer diameter (OD): 140mm
Wall thickness (WT): 14mm
Weight: 44kg
Steel grade: 1.4301

Warning! Non-prefabricated goods - not subject to the right of withdrawal from art. 38 point 3 of the Act on Consumer Rights.

The greatest advantage of seamless pipes is their durability. For this reason, pipes of this type are an indispensable element in the construction of installations, i.e. for the conduction of gases and liquids, heat exchangers, coils, recuperators, condensers, evaporators, radiators, as well as structural modules such as drilling, aircraft, motorcycle or bicycle elements . The highest resistance to pressure is characterized by seamless stainless steel pipes made of a steel rod drilled along the length, in this way, among others, pipes for the production of firearms barrels are made.

In the assortment of the Stainless Europe store you will find materials in many grades of steel. Our offer includes over 20 types of steel: stainless, acid-resistant, heat-resistant (up to 1150*C), duplex, super duplex and others.
We invite you to familiarize yourself with the offer!

Legal notes

Caution! Non-prefabricated goods - not subject to the right of withdrawal under EU Directive 2011/83/EU, art. 16(c) on consumer rights.

Sections are cut from material in lengths of 5000-7000 mm. When purchasing multiple pieces of the same product, you will receive separate sections, but cutting to any length is possible after consultation. The image in the listing does not represent the actual surface of the product. The tube is a metallurgical product in raw condition, manufactured in accordance with EN 10216-5 or ASTM 213 or ASTM 312, intended for further processing. The specifics of the band saw used for cutting do not guarantee a perfectly smooth cut surface. Cutting tolerance is -0/+5mm. Tolerance for wall thickness and diameter is no greater than T3/D3 (tolerance table). The stated tolerances apply to full lengths, and the control measurement is taken at the ends of the tube. When purchasing non-prefabricated sections other than those listed in the production certificate for a given batch, deviations from the values stated in the 3.1 certificate may be expected and this cannot be grounds for considering the product as non-compliant or substandard.