Skip to main content
Open search engine
Search
Close search engine Clear Search
Wishlist
Products in the cart: 0. See details

Your cart is empty

Stainless steel round bar 10 mm duplex 1.4462 40cm

with VAT without VAT
Price €7.40
Availability:
product-availability-module sold out
Ask about the product
Choose length
Selected: -
10 cm 20 cm 30 cm 50 cm 60 cm 70 cm 80 cm 90 cm 100 cm 110 cm 120 cm 130 cm 140 cm 150 cm 160 cm 170 cm 180 cm 190 cm 200 cm 250 cm 300 cm

Complete your order:

Certificate 3.1 - select only one for the whole basket €5.00 EUR

Specifications

  • Item length 40 cm
  • Diameter 10 mm
  • Steel grade 1.4462
  • Norm EN10088-3:2014
  • 3.1 certificate available yes

Description

Stainless round bar with a diameter of 10 mm and a length of 40 cm, produced from steel grade 1.4462 by cold drawing. Theoretical weight of the section: 0.3 kg.

Grade 1.4462 / S31803 is a duplex stainless steel combining high mechanical strength with very good corrosion resistance. Compared to standard austenitic steels, this grade offers higher strength and better resistance to stress corrosion cracking. The material is used in demanding industrial applications, including the chemical, energy, marine and offshore industries, as well as in installations working in more challenging environmental conditions.

Cold-drawn bars are produced by drawing steel through a die at ambient temperature. This results in higher dimensional accuracy, a smoother surface finish and improved mechanical properties compared to hot-rolled bars.

Legal notes

Caution! Non-prefabricated goods - not subject to the right of withdrawal under EU Directive 2011/83/EU, art. 16(c) on consumer rights.

Sections are cut from material in lengths of 5000-7000 mm. When purchasing multiple pieces of the same product, you will receive separate sections, but cutting to any length is possible after consultation. The image in the listing does not represent the actual surface of the product. The rod is a metallurgical product in raw condition, manufactured in accordance with EN or ASTM standards, intended for further processing. The specifics of the band saw used for cutting do not guarantee a perfectly smooth cut surface. Cutting tolerance is -0/+5mm.