Skip to main content
Open search engine
Search
Close search engine Clear Search
Wishlist
Products in the cart: 0. See details

Your cart is empty

Stainless steel round bar 80 mm 1.4404 / 316L 80cm

with VAT without VAT
Price €351.37
Availability:
product-availability-module sold out
Ask about the product
Choose length
Selected: -
10 cm 20 cm 30 cm 40 cm 50 cm 60 cm 70 cm 90 cm 100 cm 110 cm 120 cm 130 cm 140 cm 150 cm 160 cm 170 cm 180 cm 190 cm 200 cm 250 cm 300 cm

Complete your order:

Certificate 3.1 - select only one for the whole basket €5.00 EUR

Specifications

  • Item length 80 cm
  • Diameter 80 mm
  • Steel grade 1.4404
  • Norm EN10088-3:2014
  • 3.1 certificate available yes

Description

Stainless round bar with a diameter of 80 mm and a length of 80 cm, made of steel grade 1.4404 / 316L by hot rolling. Theoretical weight of the section: 32 kg.

Grade 1.4404 / 316L is an austenitic stainless steel with enhanced corrosion resistance, particularly in more chemically aggressive environments. Thanks to its molybdenum content, this grade offers better corrosion resistance than steel 1.4301 / 304. The material is used in the chemical, food, marine, pharmaceutical industries and in installations and equipment exposed to moisture, chlorides and other corrosive agents.

Hot-rolled bars are produced by rolling steel at elevated temperatures. This method allows for a wide range of diameters and ensures good material ductility. The surface of hot-rolled bars may exhibit a characteristic mill scale layer, which is removed during further processing.

Legal notes

Caution! Non-prefabricated goods - not subject to the right of withdrawal under EU Directive 2011/83/EU, art. 16(c) on consumer rights.

Sections are cut from stock material. When purchasing multiple pieces of the same product, you will receive separate sections, but cutting to any length is possible after consultation. The image in the listing does not represent the actual surface of the product. The product is a metallurgical product in raw condition intended for further processing. The specifics of the band saw used for cutting do not guarantee a perfectly smooth cut surface. Cutting tolerance is -0/+5mm.